Placeholder
Skip to content

Country

5.9L 12V Dodge Cummins Milled Rocker Arm Pedestal Assembly Kit for Head Studs

SKU CP200
Save 25% Save %
Original price $243.90
Original price $243.90 - Original price $243.90
Original price $243.90
Current price $183.58
$183.58 - $183.58
Current price $183.58
Vehicle Fitments
  • 1989-1998 Dodge Cummins 5.9L 12 Valve
Package Content
  • 6x Machine Milled Rocker Arm Pedestals
  • Save time and hassle by purchasing our ready machine milled rocker arm pedestals.
  • Rocker arm pedestals are required for head stud installation. This package does not include head studs. Head studs can be purchased separately by searching CP878 in our catalogue.  

    • Free domestic Shipping

      On all orders. Overnight shipping option available at checkout.

    • lifetime warranty

      If any of our products fail due to a manufacturing defect, we will replace them free of charge.

    • perfect fit, guaranteed

      If the product doesn’t match your engine, we will replace it with no extra charge.

    Based on 1162 reviews
    88%
    (1021)
    8%
    (95)
    2%
    (26)
    0%
    (5)
    1%
    (15)
    Looked Great

    easy to install if not dumb like me, should have been a walk in the park watched vids and got her done.

    T
    2004+ Chevrolet Gen III IV LS Cylinder Head Bolts Kit
    Thomas Hughes (Jeffersonville, US)
    LS2

    Very high quality and are on par to th ARP bolts I looking at.

    Cummins head studs kit 89-98

    I have not had a chance to install yet as I am still assembling the motor. However I was extremely pleased with the fast shipping and neatness of the packing. Very professional

    R
    Thread Chaser M11 x 2.00 " - CS324
    ROBERT SERKE (Southbury, US)
    Thread chaser tap

    Looks good, have not used it yet.

    Head studs

    Great product , great quality, fast shipping!

    5.9 studs

    Worked as expected

    Great product

    Great shipping and packaging looks like a great product have not been able to install yet

    Amazing product

    They went in and seem to be working great the only thing I noticed was in the instructions there were a couple of repeated numbers

    6.7 powerstroke

    smaller m8 bolts on exhaust side of head make clearance issues for exhaust manifold gaskets. Also, if block isn't bottom tapped, the studs hit bottom of rocker arm assemblies.

    2004 Dodge 5.9 Cummins head studs

    I installed these studs a week ago. So far so good and I don’t expect it to go any other way. They came very well packaged, with clear installation instructions. The head studs are very well manufactured and are a for sure upgrade to do on your diesel engine. I highly recommend buying some Xotic head studs!

    Works amazing and they feel nice and strong

    Perfect for the above stock truck

    I have these head studs in 2 different Cummins motors running better turbos and tunes. We put about 50k miles a year on each truck pulling trailers more often than not and these studs do an amazing job of keeping the head down and the gasket whole. I will be adding them to my next truck at my earliest convenience.

    Quality

    Great packaging!! Easy well illustrated instructions to follow and packing is really clean and organized.

    6.7L & 5.9L 24V Dodge Cummins Head Stud Kit 1998.5-Present

    The price of these are really good! And they torqued up really nice too! Only thing is the steel is from china but still better than a head bolt.

    Chase spark plug thread

    Worked as expected, cleaned out threads .

    Quality tools.

    This thread chasing set is a very high quality item. This set would be for SAE threads with 5 common thread sizes. They are cut very well so your threads will be spot on.

    Good set, nicely finished.

    This set offers a good assortment if it has the sizes you need. There are other sets, too, and the individual sizes are available separately. I have some of the sets, and the quality across them has been consistent. I haven't had a chance to try all of the sizes, but so far the threads look to be cleanly cut.

    2004+ Chevrolet Gen III IV LS 4.8L 5.3L 5.7L 6.0L 6.2L Small Block Cylinder Head Stud Kit (primary bolts must all have the SAME lengths)

    Rebuilding my 7.3

    I am rebuilding a 7.3 and will be putting it in an E-350 that I will be pulling a horse trailer with. These appear to be of excellent quality and are packaged with the threads well protected. I did not do destructive testing but these seem up to the intended task. Recommended.

    Nice

    No problem after few passes

    looks like a tap

    Not sure what the difference is between this thread "chaser" and a tap. I ordered a same size tap from another company and they both looked exactly the same. The tap was also much less expensive than this chaser

    A bit pricy but they are excellent quality.

    I've owned and still own all kinds and levels of taps and thread chasers, from one time use garbage to top of the line expensive stuff. These are on par with some of the better stuff I have in terms of metal quality/hardness, and thread precision. I agree with others that for the price they should have case instead of a simple cardboard bubble pack but the quality of the tools is there otherwise.

    Great stud kit!

    I was skeptical because this was an unknown brand to me but the quality is on par with the more well known brand I'm used to based on my initial impressions. It's pretty obvious they have pretty strict quality control measures and hopefully they will expand their product line further. It is nice (although not necessary) that they include a socket and allen key.